Intellinet Network Solutions 523967 - Manual (Page 16)

3. Connect the A/C power adapter to the wall socket, and then connect it
to the 'Power' socket of the router.
4. Check all LEDs on the front panel.
The 'PWR' LED should be steadily on, WAN and LAN LEDs should
be on if the computer or network device connected to the respective
port of the router is powered on and correctly connected.
If the PWD LED is not on, or any LED you expected to be on is not
on, please recheck the cabling, or go to chapter '4-2 Troubleshooting'
for possible reasons and solutions.