Intellinet Network Solutions 523967 - Manual (Page 61)

2-6-2 DHCP Server:
These settings are only available when 'DHCP Server' in the 'LAN IP'
section is 'Enabled', and here are descriptions for the setup items:
Lease Time (1):
Choose a lease time (the duration that every
computer can keep a specific IP address) from
dropdown menu of every IP address assigned by this
router.
Start IP (2):
Enter the start IP address of the IP range.
End IP (3):
Enter the end IP address of the IP range.
Domain Name (4): If you wish, you can also input the domain name for
your network. This is optional.
Recommended values if you don’t know what to enter:
Lease Time: Two Weeks (or ‘Forever’, if you have fewer than 20 computers)
Start IP: 192.168.2.100
End IP: 192.168.2.200
Domain Name: (leave it blank)
NOTE:
1. The number of the last field ( ‘d’ field) of ‘End IP’ must be greater
than ‘Start IP’, and can not be the same as the router’s IP address.
2. The former three fields of the IP address of ‘Start IP’, ‘End IP’, and ‘IP
Address of ‘LAN IP’ section ( ‘a’, ‘b’, and ‘c’ fields) should be the same.
3. These settings will affect wireless clients, too.
1
3
4
2