Intellinet Network Solutions 523967 User Manual
Page 95
3-2-5 UPnP Setting
This function enables network auto-configuration for peer-to-peer
communications. With this function, network devices will be able to
communicate with other UPnP enabled devices directly, and learn about
other devices. Many network device and applications rely on UPnP
function nowadays.
Click the 'NAT' menu on the left of the Web management interface, then
click 'UPnP' and the following screen appears:
There is nothing to configure for UPnP. You can either activate it or
deactivate it. Click 'Apply' to save the settings.
Click 'Continue' to go back to the previous setup menu and to continue
with the router setup. Click 'Apply' to reboot the router so the settings
will take effect. Please wait for about 30 seconds while the router is
rebooting.