Intellinet Network Solutions 523967 - Manual (Page 94)

UDP Port to Open (4): This is the outgoing (Outbound) range of UDP
port numbers for this particular application.
Comment (5): The description of this setting.
Popular
This section lists some popular applications that
Applications (6): require multiple connections. Select an application
from the Popular Applications selection and click
'Add' to save the setting to the 'Current Trigger-Port
Table.'
Add (7): Add the setting to the Current Trigger-Port Table.
Reset (7):
Resets all input form values.
Current Trigger-Port Table
All the settings for the specifal applications are
listed here. If you want to remove some Special
Application settings from the Current Trigger-Port
Table, select the Special Application settings you
want to remove in the table and then click "Delete
Selected". If you want remove all Special
Application settings from the table, just click
the"Delete All" button. Click "Reset" to clear your
current selections.
Note: Only one LAN client can use a particular special application at a
time.
Click 'Apply' (10) to save the settings.
Click 'Continue' to go back to the previous setup menu and to continue
with the router setup. Click 'Apply' to reboot the router so the settings
will take effect. Please wait for about 30 seconds while the router is
rebooting.