Intellinet Network Solutions 523967 - Manual (Page 92)

Items and meanings:
Enable Virtual
Check this box to enable virtual server,
Server (1): and uncheck this box to disable virtual server.
Private IP (2):
Input the IP address of the computer or network
device which provides the network service.
Private Port (3):
Input the port number of the IP address
which provides Internet service.
Type (4):
Select the type of connection, TCP or UDP. If you're
not sure, select 'Both'.
Public Port (5):
Select the number of the public port which will be
redirected to the port number of the local IP address
defined above.
Comment (6):
Enter any text to describe this mapping, up to 16
alphanumerical characters; e.g., "FTP Server".
Add (7):
Adds the mapping to virtual server table.
Reset (8):
Remove all input values.
Virtual Server
All existing virtual server mappings will be
Table (9): displayed here.
Delete
Select a virtual server mapping by clicking the
Selected (10): 'Select' box of the mapping, then click 'Delete
Selected' button to remove the mapping. If there's no
existing mapping, this button will be grayed out.
Delete All (11):
Delete all existing virtual server rules.
Reset (12):
Unselect all mappings.
Click 'Apply' (13) to save the settings.