Intellinet Network Solutions 523967 - Manual (Page 51)

Continuous – The connection will always be kept on. If
the connection is interrupted, the router will re-connect
automatically.
Connect On-Demand – Only connect when you want to
surf the Internet. “Idle Time Out” is set to stop the
connection when the network traffic is not sending or
receiving after an idle time.
Manual – After you have selected this option, you will
see the “Connect” button and “Disconnect” button.
Click “'Connect” and the router will connect to the
ISP. If you want to stop the connection, click the
“Disconnect” button.
Idle Time Out (6): If you have selected “Connect-On-Demand”, enter
the idle time out.
Click 'Apply' (3) to save the settings and 'Cancel' to remove the
information entered.
Click 'Continue' to go back to the previous setup menu and to continue
with the router setup. Click 'Apply' to reboot the router so the settings
will take effect. Please wait for about 30 seconds while the router is
rebooting.