Intellinet Network Solutions 523967 - Manual (Page 79)

2-7-5 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build a connection
between wireless network clients and this wireless router. You don't have
to select an encryption mode and input a long encryption passphrase
every time you need to setup a wireless client: You only have to press a
button on a wireless client and this wireless router, and the WPS will do
the rest for you.
This wireless router supports two types of WPS: Push-Button
Configuration (PBC), and PIN code. If you want to use PBC, you have to
push a specific button on the wireless client to start the WPS mode, and
switch this wireless router to WPS mode, too. You can push the
Reset/WPS button of this wireless router, or click the 'Start PBC' button
in the Web configuration interface to do this. If you want to use PIN code,
you have to know the PIN code of the wireless client and switch it to
WPS mode, then provide the PIN code of the wireless client you wish to
connect to this wireless router. The detailed instructions are:
Click the 'Wireless' menu on the left of the Web management interface,
then click 'WPS', and the following message will be displayed on your
Web browser: