Invacare TRACER EX2 User Manual

Page 23

Advertising
background image

3 SAFETY

Part No 1110546

23

Invacare

®

Tracer™ EX2 Wheelchair

Position the wheelchair as close as possible alongside the seat to which

you are transferring, with the front casters pointing parallel to it.

Remove or flip up the armrest. Engage wheel locks. Swing away or

remove front rigging. Shift body weight into seat with transfer.
During independent transfer, little or no seat platform will be beneath

you. Use a transfer board if at all possible.

FIGURE 5 Transferring To and From Other Seats

Unfolding and Folding Wheelchair

Unfolding
1.

Tilt the wheelchair toward you (raising the opposite wheel and caster off the ground/floor).

ƽ

CAUTION

When transferring, position yourself as far back
as possible in the seat. This will help prevent
damaged upholstery and the possibility of the
wheelchair tipping forward.

This activity may be performed independently
provided you have adequate mobility and upper
body strength.

ƽ

WARNING

ALWAYS keep hands and fingers clear of moving parts to avoid injury.
DO NOT place hand or fingers on the underside of the seat frame rail when opening or closing the wheelchair.
DO NOT sit or transfer into the wheelchair unless it is fully open and the seat frame rails are fully seated into the side
frame H-blocks.

Advertising