Invacare TRACER EX2 - Manual (Page 27)

4 SAFETY INSPECTION/TROUBLESHOOTING
Part No 1110546 27 Invacare ® Tracer™ EX2 Wheelchair
❑ Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑ Inspect front caster for cracked, bent or broken spokes.
❑ Ensure that casters are free of debris.
Inspect/Adjust Monthly
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Check that the wheel locks DO NOT interfere with tires when rolling.
❑ Check that the wheel lock pivot points are free of wear and looseness.
❑ Inspect seat and back for loose or broken hardware.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged.
Replace if necessary.
❑ Inspect back cane hand grips for wear/looseness/deterioration.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Check headtube locknuts for tightness.
Inspect/Adjust Periodically
❑ Inspect frame and crossbraces for loose or missing hardware.
❑ Inspect for bent frame or crossbraces.
❑ Check that wheel locks are easy to engage.
❑ Inspect seat and backs for rips and sagging.
❑ Check that there is no excessive side movement or binding in the rear wheels when lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.