Removing/installing armrests – Invacare TRACER EX2 User Manual
Page 40
6 ARMS
40
6.2
Removing/Installing Armrests
Removing Armrest
1.
Push down on armrest to ensure it is fully seated in front and rear sockets.
2.
Press in the armrest release button at the front and rear of the armrest.
3.
While pressing in the armrest release buttons, remove the armrest from the arm sockets by pulling straight up.
Installing Armrest
1.
Position the armrest just above the front and rear arm sockets.
2.
Push arm down evenly at the front and rear until the front and rear armrest release buttons snap into the arm sockets.
3.
Ensure armrest is locked securely in the arm sockets by gently lifting up. If not locked, repeat STEPS 1-3.
FIGURE 2 Removing/Installing Armrests
ƽ
WARNING
Make sure the height adjustment lever is in the locked position before using the wheelchair.
STEP 1 prevents the release buttons from hanging up on the sockets during removal.
Armrest Release Button
Armrest
Rear Arm Socket
Front Arm Socket
Armrest Release Button