Installing the seat positioning strap, Used). refer to installing – Invacare TRACER EX2 User Manual
Page 62
12 OPTIONS
62
12.3 Installing the Seat Positioning Strap
1.
Remove the bottom back upholstery screw from the wheelchair.
2.
Position the seat positioning strap half between the back cane and back upholstery.
3.
Secure the back upholstery and seat positioning strap to the wheelchair with the existing back upholstery screw.
4.
Repeat STEPS 1-3 for the opposite side of the wheelchair.
FIGURE 3 Installing the Seat Positioning Strap
ƽ
WARNING
ALWAYS wear your positioning strap. Inasmuch as the Seat Positioning Strap is an option on this wheelchair (You may
order with or without the seat restraint), Invacare strongly recommends ordering the Seat Positioning Strap as an
additional safeguard for the wheelchair user.
Back Upholstery Screw
Strap Positioning Strap
Back Upholstery
Back Cane