Invacare TRACER EX2 - Manual (Page 41)

7 SEAT AND BACK
Part No 1110546 41 Invacare ® Tracer™ EX2 Wheelchair
7 Seat and Back
7.1 Replacing Back Upholstery
1. Remove the eight mounting screws and washers that secure the
existing back upholstery to the back canes.
2. Remove existing back upholstery from the back canes.
3. Securely tighten the new back upholstery to the back canes with the
phillips screws and washers.
7.2 Replacing Seat Upholstery
1. Remove the eight phillips screws and washers that secure the existing
seat upholstery to the crossbraces.
2. Remove the existing seat upholstery from the crossbraces.
3. Ensure positioning of seat positioning strap (if used). Refer to Installing
the Seat Positioning Strap on page 62.
4. Install new seat upholstery by reversing STEPS 1-2.
FIGURE 1 Replacing Back Upholstery
FIGURE 2 Replacing Seat Upholstery
ƽ WARNING
After any adjustments, repair or service and before use,
make sure all attaching hardware is tightened securely -
otherwise injury or damage may occur.
Washers
Back Upholstery
Washers
Mounting
Screws
Mounting
Screw
Wheelchair
Frame
Seat
Upholstery
16-inch Seat
Depth