Invacare Wheelchair Pronto M61 - Manual (Page 22)

SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS
Pronto® M51™and M61™with SureStep® 22 Part No 1125085
Reaching and Bending - Backward
ƽ WARNING
DO NOT lean over the top of the back upholstery. This will change your center of
gravity and may cause you to tip over.
NOTE: For this procedure, refer to For this procedure, refer to FIGURE 3.7.
Position wheelchair as close as possible to the desired object. Point the front AND rear
casters rearward to create the longest possible wheelbase. Reach back only as far as your
arm will extend without changing your sitting position.
FIGURE 3.7 Reaching and Bending - Backward