Invacare Wheelchair Pronto M61 - Manual (Page 72)

SECTION 12—ELECTRONICS
Pronto® M51™and M61™with SureStep® 72 Part No 1125085
FIGURE 12.1 Removing/Installing the Joystick
Repositioning the Joystick
Van Seat
NOTE: For this procedure, refer to FIGURE 12.2 on page 73.
NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick
assembly.
1. Turn the adjustment lock lever to release the joystick mounting tube from the
mounting bracket.
2. Remove the joystick from the wheelchair.
3. Remove the three hex mounting screws, spacers and locknuts that secure the
mounting bracket to the three mounting holes on the arm frame.
NOTE: The mounting bracket is mounted to the inside of the arm frame.
4. Reposition the mounting bracket on the opposite arm frame.
Joystick
Joystick
Mounting
Tube
Mounting
Screws
Mounting Bracket and
Adjustment Lock Lever
Office Style Seat
Standard
Arm
Joystick
Office Style Seat
Joystick Cable
Tie-Wrap Here
Tie-Wrap Here
Standard
Arm
DETAIL “A” - TIE-WRAP
LOCATIONS