Invacare Wheelchair Pronto M61 - Manual (Page 37)

SECTION 6—ARMS
Part No 1125085 37 Pronto® M51™and M61™with SureStep®
Adjusting Angle
NOTE: For this procedure, refer to FIGURE 6.3.
ƽ WARNING
Pinch point may occur when adjusting
the arm angle position.
1. Lift up the armrest.
2. Loosen the jam nut.
3. Adjust the socket screw up or down to
the desired arm angle position.
4. Tighten the jam nut.
5. To determine the same angle for the
opposite armrest, count the exposed
threads after the jam nut has been
tightened.
6. Repeat STEPS 1‐5 for opposite armrest,
if necessary.
FIGURE 6.3 Adjusting Angle
Adjusting Height
NOTE: For this procedure, refer to FIGURE 6.4.
1. Remove the socket screw that secures the armrest to the seat frame assembly.
2. Adjust the armrest to one of four positions.
3. Reinstall the socket screw that secures the armrest to the seat frame assembly and
tighten securely.
FIGURE 6.4 Adjusting Height
Arm Pad
Adjustment
Screw
Jam Nut
Count Exposed Thread
Pinch Point
Armrest
Height
Adjustment
Holes
Arm Frame
Assembly
Lock Knob