As/400, Configuration of as/400 networks, 1 creating appc device description – I-Data ReRouter User Manual
Page 33
Configuration of AS/400 Networks
ida ReRouter
33
6. Configuration of AS/400 Networks
The object of this chapter is to provide you with guidelines for manual
configuration of your AS/400 system connecting to an IPDS session. The
examples assume that configuration is made for a Token Ring attached
workstation.
6.1 Creating APPC device description
Type: CRTDEVAPPC
Prompts:
Parameter and values in
parentheses
Device description:
DEVD(RER1APPC)
Remote location name:
RMTLOCNAME(RER1)
This value must match the remote
location name (RMTLOCNAME) parameter
in the CRTDEVPRT (Create Devic e
Description Printer) command description.
This value must be unique within a network.
Remote network
RMTNETID (DKIDTN01)
identifier
Enter the name of the network in which your
partner logical unit is located.
Attached controller:
CTL(IDATA1)
This name matches the local Node
name in the local Node characteristics panel
of the Communications Manager SNA
Network Definitions.
Mode
MODE(QSPWTR)
QSPWTR is an IBM supplied mode.
APPN capable
APPN (*YES)
Single session
SNGSNN (*NO)
Text 'description'
TEXT('APPC device for RER1PRT')