I-Data ReRouter - Manual (Page 55)

Testing Connection to Remote Device
ida ReRouter
55
AS/400:
The Network ID can be obtained from the AS/400 RMTNETID
parameter in
- AS/400 APPC controller description
The Partner LU is obtained from the AS/400 LCLLOCNAME parameter
in:
- AS/400 APPC device description
- AS/400 APPC printer device description
12. Local LU name
Specifies the real name of the logical unit (LU) as known in the system.
Must match the name in:
S/370 - S/390:
NCP/VTAM LU name.
AS/400:
AS/400 APPC device description
AS/400 printer device description
13. Local LU alias
Identifies the LU alias to be used when activated by the S/370 - S/390
or AS/400 system. This parameter must match the LU Alias in the ida
ReRouter program.
14. Local LU address
Specifies the network addressable unit (NAU) for this logical unit (LU).
It must match the NCP/VTAM LOCADDR. A value of X'00' specifies an
independent LU and values between 2 and 255 (X'01' and X'FF')
specify dependent LUs.
The support of independent LUs requires the fol lowing level of network
hardware and software:
- ACF/VTAM level 3.3 ACF/NCP 4.2 or later
- Token Ring 37XX - ACF/VTAM 3.3, ACF/NCP 4.2 or
later
- Establishment Controller (3174) Token Ring gateway
ACF/VTAM 3.3 microcode C1.0 or later