I-Data ReRouter - Manual (Page 66)

Problem Determination
ida ReRouter
66
ROUT0611I: Trace enabled [...]
Description: Program trace is enabled.
Action:
Note:
Trace information is written to the <LUALIAS>.trc
file. (see section 9.2: "Trace" for further information).
ROUT0612W: SWIDDEF file error [...]
Description: The swiddef is either invalid or non-existing.
Action: Re-install or update the ida ReRouter.
If problem persists then contact your point of purchase.
Note: -
ROUT0613I: Printer is not ready (IRQ on remote printer)
Description: An IRQ message has been discovered in the
remote printer.
Action: Check the remote printer to establish the IRQ
situation (paper jam, paper out, off-line?).
Note: -
ROUT0614I: Printer is ready (IRQ solved)
Description: Information only.
Action: -
Note: -
ROUT0615E: TCP/IP printer protocol error
Description: A protocol error has occurred between the
ida ReRouter and the remote device.
Action: Check the remote device and retry.
Note: -
ROUT0616I: Connection established to [...] port [...]
Description: A connection has been established to the IP
address [...], port no. [...].
Action: -
Note: Information only.