I-Data ReRouter - Manual (Page 42)

Workstation Configuration
ida ReRouter
42
2. Host connection (normally S/370-390):
2a. Select “ Activate at startup ”
2b. Select “ Local PU Name”
2c. Select " APPN Support" (if needed)
2d. Set "Node ID", see worksheet (
8
)
2e. Set "LAN destination address " to: see worksheet (
16
)
2 f. Specify “ Address format” as required
2g. Fill in “Partner network ID ” see worksheet (
11
)
2h. Fill in “Partner node name ” see worksheet (
11
)
3. Peer node connection (normally AS/400):
3a. Select “ Activate at startup ”
3b. Set "LAN destination address " to see worksheet (
16
)
3c. Specify “ Address format”
3d. Set “Remote SAP”
3e. Fill in the " Partner network ID ", see worksheet (
11
)
3f. Fill in the " Partner node name ", see worksheet (
11
)
4. Select "OK"
Connections List
1. Select "Close"
Configuring SNA features
Communications Manager Profile List Sheet
1. Select "SNA Features"
2. Select "Configure"