I-Data ReRouter - Manual (Page 43)

Workstation Configuration
ida ReRouter
43
Creating a local LU
SNA / Local LUs Features List
1. Select "Local LUs"
2. Select "Create"
Local LU
1. Set "LU name" to: see worksheet (
14
)
2. Set "Alias" to: see worksheet (
15
)
The LU Alias must be the same as defined in
the ida ReRouter.
3 If dependent LUs are being used select LU NAU
address (
16
).
4. Select "OK"
SNA Features / Partner LU
1. Select "Partner LUs"
2. Select "Create"
3. Set "Fully Qualified LU " to: see worksheet (
11
)
4. Set "Partner LU Alias" (user defined)
5. Select "OK"
NOTE: With Communications Manager/2 , version 1.11 or higher,
special setup definitions have to be made to make a VTAM LU
6.2 session work.
1. The partner LU must be defined. Fill in the Network ID and Partner
Node Name in accordance with the VTAM definitions (consult your
VTAM programmer if needed).
2. In the Partner LU configuration screen, you must tick the field
“Conversation Security verification” or else the VTAM session will not
become operational.
Optional
parameter -
CM dependent