I-Data ReRouter - Manual (Page 54)

Testing Connection to Remote Device
ida ReRouter
54
8. Node ID
This identifier is used by the host to link with thi s workstation when
attached to a T/R network. It must be unique within a switched node
network. Co-ordinate this assignment with your network administrator.
S/370 - S/390:
Must match the host VTAM IDNUM configuration parameter. Set the
Node ID parameter to zero (0) for an establishment controller (e.g.
3174). Co-ordinate this assignment with the network administrator.
AS/400:
This value will be used by AS/400 when automatically creating the
APPC controller description for the PC.
9. TP name
The transaction program name (must be in capital letters).
10. Transaction program path / file name
Specifies the full path name, file name and file extension of the
C.\<path>\<filename> program.
11. Full PLU name
Specifies the real network name of the Partner LU. The name has two
parts:
1. Network ID
2. Partner LU (PLU) as specified within the network
S/370 - S/390:
Network ID is the VTAM NETID.
Partner LU Name is the application’s (e.g. PSF) APPL ID in VTAM.
Remember also to tick the fie ld “Conversation Security verification”.