I-Data ReRouter - Manual (Page 41)

Workstation Configuration
ida ReRouter
41
Connection List
The connection may already have been defined. If so, check that the
connection matches the description below. (If the connection is to be
changed, select “Change” instead of “Create.)
For S/370 host connection:
1. Select "To host" under partner type
2. Select "Create"
For AS/400 host connection:
1. Select "To peer node"
2. Select "Create"
Adapter List
1. Select the relevant adapter under " Adapter type"
2. Select "Adapter number" , see worksheet (
2
)
3. Select "Continue"
Connection to a Host /Network node /Peer Node
Three types of connections are available:
1. Network node connection (normally AS/400):
1a. Select " Activate at Startup ".
1b. Set “LAN Destination address ”, see worksheet (
16
)
1c. Specify “ Address format”. This parameter will depend on the
physical method of connection.
1d. Select: “ Use this network node as your preferred server ”.