i-mate PDA2 - Manual (Page 84)

Pocket PC Phone User Manual 84
Getting
Connected
Pocket PC Phone User Manual 85
Getting
Connected
Bluetooth Settings
With Bluetooth Settings, you can:
n Turn Bluetooth on/off and enable/disable Bluetooth services.
n Create or Change a name for your Pocket PC Phone when using Bluetooth to connect with
other devices.
n Set your connection preferences and user profile.
n Specify security settings and define settings for sharing and connecting.
Turning On Bluetooth
In the lower right corner of the Today screen, tap the icon to open the menu.
Select Turn Bluetooth ON from the menu. Or, Select Bluetooth Settings > Turn On.
NOTE: In a situation where Flight mode is on but Bluetooth is off, it is not possible to turn
on Bluetooth. If you wish to turn on Bluetooth, turn off flight mode first, and then turn on
Bluetooth.
Using Profiles
All Bluetooth Settings are saved in the active profile. When your Pocket PC Phone is
turned off, Bluetooth Settings saves the last-used profile and reloads that profile the next
time your Pocket PC Phone is turned on. Setting the profiles allows:
n Different users to quickly re-configure the Pocket PC Phone to the personal preferences.
For example, if Joe and Mary both use the same Pocket PC Phone, but each uses it for
a different purpose, selecting a pre-configured profile will alter the settings to those of the
appropriate user.
n A single user to quickly re-configure the Pocket PC Phone for a different environment. If
Joe uses his device primarily at the office, but also uses it when traveling, he can easily
switch to a pre-configured profile that has more secure settings for hotel, airport, or similar
“public” environments.
Creating a new profile:
1. In the General tab, tap to access a screen in which you can Add, Rename, or Delete a
profile.
2. Tap the New button.
3. Enter a descriptive name for the new profile, for example, Office.
4. Select an existing profile on which to base the new profile.
5. Tap
OK.
The new profile does not automatically become the active profile. To activate the new profile,
select it from the Current Profile field in the General tab.