Invoking wlan manager, Using wlan manager – i-mate PDA2 User Manual
Page 97
Pocket PC Phone User Manual
96
Getting
Connected
Pocket PC Phone User Manual
97
Getting
Connected
Invoking WLAN Manager
To open the Wireless LAN Manager screen, select
Start menu > Settings > Connections
> WLAN. Or, if you have the Wireless Manager screen open (mentioned above), you can
tap the
WLAN icon in the Toolbar at the bottom of the Wireless Manager screen.
Using WLAN Manager
The WLAN Manager application consists of three screens: Main, Settings, and LEAP. By
default, the Main screen is displayed. Tap the Settings tab or the LEAP tab near the bottom
of the screen to open those screens.
In the Command Bar, there are two icons. The leftmost icon,
Network Cards, is a shortcut
to the
Start menu > Settings > Connections tab > Network Cards utility. Tapping the
rightmost icon,
Wireless Manager, will switch to the Wireless Manager utility. (Access the
on-line Help from those screens if you need information about their usage.)
NOTE: Tapping the
Network Cards icon mentioned above will open the Configure Wireless
Networks screen. This screen lists the available APs and lets you add a new one. Note that
if you are currently connected to the AP, and a correct IP address has been obtained, the
status will be shown as “Connecting” initially. In order to re-paint the status as “Connected,”
simply refresh by leaving the screen and then coming back to it again.