i-mate PDA2 - Manual (Page 91)

Pocket PC Phone User Manual 90
Getting
Connected
Pocket PC Phone User Manual 91
Getting
Connected
To make this connection the default dial-up connection for Pocket Internet Explorer when
using Bluetooth modem, you still need to complete the following steps:
1. From the Today screen, tap the Start menu > Settings > the Connections tab.
2. Tap the Connections icon > the Advanced tab > Select Networks.
3. Enable Bluetooth Settings in the drop-down list.
Send via Bluetooth
Pocket Outlook Contacts, Calendar items, and Tasks can be sent individually or collec-
tively to a remote device. To send data via Bluetooth transfer:
1. Select Programs from the Start menu. Then, open Calendar, Contacts or Tasks.
2. Highlight the item(s) to be sent.
3. Tap-and-hold the item(s), then select
Send via Bluetooth from the pop-up menu.
4. In the Select a Bluetooth device screen, tap the name of the destination device, and then tap
OK.
Bluetooth Personal Area Network
A Bluetooth personal area network is a private, temporary, ad-hoc network of up to eight
devices. A Bluetooth personal area network makes it easy to exchange information that
would normally require a TCP/IP network. For example, most chat utilities and multi-player
games are fully functional in a Bluetooth personal area network environment.
Bluetooth personal area networks are subject to the same security settings that govern
other Bluetooth communications such as service availability, authorization, authentication,
and encryption.
One Bluetooth device must be the host of the personal area network. Other Bluetooth devices
join the network as clients. The host can accept and reject clients on an individual basis.
To host a
Personal Area Network:
1. Select Bluetooth Manager > New > Connect > Join a personal network > Next.
2. On the next wizard screen, select Host a personal network > Next.
3. Add remote devices to the Bluetooth Personal Area Network, if desired:
Tap the Add button and select the device to be added.
Add additional devices, if desired. You can select up to eight total, including the host.
After all the desired devices have been added, tap
OK to complete the setup and close the
wizard. Adding devices is optional; devices do not have to be added to the personal area
network when the Host is configured. Devices can join the personal area network later.