Inter-Tel INT4000 - Manual (Page 73)

61
INT4000 Cordless Telephone User Guide
MO
VING O
N
P
ROGRAMMING
R
EMOTE
F
EATURE
A
CCESS
If you are away from your desk and have forgotten to put your phone in DND, don’t
worry. With the Remote Feature Access, you can place your phone in DND or for-
ward calls from any other phone on the system. And, if you have a special dial-up
line, you can access your phone features from an outside line.
Remote Access Password
Before you use Remote Feature Access, you should program a password, as described
below.
To change the password from your phone:
1. Dial .
2. Enter your current password, followed by .
NOTE: Your extension number is your password at default.
3. Enter the new password followed by .You hear a confirmation tone.
4. Enter the new password again for verification followed by . You hear a con-
firmation tone.
To change the station password using remote programming, see the following section.
Remote Feature Access
To access your phone from another phone:
1. Dial .
2. Enter your extension number.
3. Enter your password followed by . You can now use any of the following
features:
To change the station password using Remote Programming:
a. Dial .
b. Enter the new password, followed by .
c. Enter the new password again for verification, followed by .
To turn on DND:
a. Dial .
b. Enter the message number (01-20) and enter the optional second-line mes-
sage text.
c. Press to hang up.
3 9 2
#
#
#
3 5 9
#
3 9 2
#
#
3 7 0
TALK