JAI TM-1020 - Manual (Page 17)

Page 7
TM-1020 Series Progressive Scan Shutter Cameras
Installation
2.2.2 (b) 12-Pin Connector (Camera Link Version)
The CL versions have a 12-pin Hirose connector for power input and signal integration. Pin #1 is
Ground and pin #12 is +12V DC. The pin-out table is shown below. For TM-1020-15CL, serial
communication camera control is done via the Camera Link connector on the rear panel of the camera.
TABLE 2. 12-Pin Connector (CL Version)
Pin Description Pin Description
1 GND 7 VD in
2 +12V DC 8 Strobe out
3 GND (analog) 9 HD in
4 Video out 10 N/C
5 GND (digital) 11 Integration Control
6 VINIT in 12 N/C
1
2
3
4
5
6
9
8
7 11 12
10