JAI TM-1020 - Manual (Page 22)

Page 12
TM-1020 Series Progressive Scan Shutter Cameras
Installation
2.2.6 Camera Link Cable (CL Versions Only)
The Camera Link cable has a 26-pin connector on both ends. This is a straight-through cable and the
pin-out configuration is shown in Table 4 on page 9. Contact JAI, Inc. for cable lengths other than 2
meters.
FIGURE 7. Camera Link Cable
Note: For CL versions, serial communication for camera control is done via the Camera Link
connector on the rear panel of the camera.
2x
Thumbscrews
2x
Thumbscrews
Cable
26 Position
High Density
Mini D Ribbon
(MDR) Male Plug
26 Position
High Density
Mini D Ribbon
(MDR) Male Plug