JAI TM-1020 - Manual (Page 30)

Page 20
TM-1020 Series Progressive Scan Shutter Cameras
Operation
3.6 Asynchronous Reset
The TM-1020 series's asynchronous reset is flexible and accepts external horizontal drive (HD) for
phase locking. When the VINIT pulse is applied, it resets the camera's scanning and purging of the
CCD. For asynchronous image capturing by frame grabbers, it outputs single FDV at async reset. For
the TM-1020-15 and -15CL versions, there are three modes to control the asynchronous reset and
shutter speed:
• Internal Shutter Speed with Fast Mode
• Internal Shutter Speed with Slow Mode
• External VINIT with Pulse Width
For the entire line of TM-1020 series cameras except the -15 and -15CL models, there are two modes to
control the asynchronous reset and shutter speed:
• Internal Shutter Speed Control
• External VINIT with Pulse Width
VINIT
VD
VIDEO
Shutter Video
SG (TRANSFER GATE)
DISCHARGE PULSE
ASYNC RESET
Stand-by Image Stand-by Image
PROGRESSIVE OUTPUT