Mode adjust – JBL AV1 User Manual
Page 106
Mode Adjust
JBL Performance
5-8
PL +
•
Designed for playback of Dolby Surround-encoded sources.
•
Decodes four channels from Dolby Surround-encoded sources.
•
Uses a mono surround channel with a high-frequency rolloff
above 7kHz.
•
Applies THX re-equalization to simulate high-frequency
rolloffs that occur in movie theaters. Most films are mixed for
movie theaters, and might sound too bright when played
back in home theaters without re-equalization.
•
Applies THX timbre matching to minimize timbre differences
between the front and surround channels, which results in
smoother sound movements between them.
•
Recommended for home theaters with THX-certified speaker
setups.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29 for detailed
descriptions
.
CIN
•
Designed for playback of matrix-encoded digital stereo film
sources.
•
Derives six channels when both side and rear speakers are
present (rear channels will be in parallel). Derives five chan-
nels when only side or rear speakers are present. The sub-
woofer channel is generated through bass management in
the AV1.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29 for detailed
descriptions
.
Option/Parameter
Default Setting
Possible Settings
RE-EQUALIZER
ON
ON, OFF
OUTPUT LEVELS
--
--
CUSTOM
--
--
MODE ADJUST
PL +
Option/Parameter
OUTPUT LEVELS
CUSTOM
MODE ADJUST
CIN