JBL AV1 - Manual (Page 138)

Troubleshooting & Maintenance
JBL Performance
6-4
RESTORING FACTORY-DEFAULT SETTINGS
When factory-default settings are restored, all parameters and user-
defined values are restored to their factory-default settings. Before
restoring factory-default settings, it is recommended to record all
user-defined settings on the installation worksheet that begins on
page A-14.
To restore factory-default settings:
1. Record all user-defined settings on the installation worksheet
that begins on page A-14. When factory-default settings are
restored, all parameters and user-defined values are restored to
their factory-default settings.
2. If the AV1 is powered on, press the front panel Standby but-
ton or the remote control Off button to activate standby mode
and deactivate the AV1. If the AV1 is in standby mode, proceed
to step 3.
3. Press the front panel Standby button or the remote control
On button to deactivate standby mode and activate the AV1.
4. Quickly press and hold the front panel or remote control Mute
button until the FACTORY SETTINGS menu shown below
opens on the on-screen and front panel displays.
The Mute button must be pressed within 2 seconds of activat-
ing the AV1. If the message "MUTE ON" appears on the on-
screen and front panel displays when the Mute button is
pressed, too much time has passed. If this occurs, begin again
with step 2.
5. Press the remote control and arrows to highlight the
desired option. Highlight the RESTORE DEFAULTS option to
restore factory-default settings. Highlight the EXIT option to
close the FACTORY SETTINGS menu without restoring factory-
default settings.
6. When the desired option is highlighted, press the arrow to
select this option.
• If the RESTORE DEFAULTS option was selected, the FAC-
TORY SETTINGS message shown below appears on the on-
screen and front panel displays. When this message
appears, press a front panel or remote control button to
restart the AV1.
• If the EXIT option is selected, the FACTORY SETTINGS menu
will close and the two-line status (page 2-14) opens on the
on-screen and front panel displays.
FACTORY SETTINGS
EXIT
RESTORE DEFAULTS
FACTORY SETTINGS
EXIT
RESTORE DEFAULTS
FACTORY SETTINGS
HAVE BEEN RESTORED
PRESS ANY KEY
TO RESTART