JBL AV1 - Manual (Page 124)

Mode Adjust
JBL Performance
5-26
The table at the bottom of the previous page indicates the con-
ditions in which THX Ultra2 and DTS-ES decoding are engaged.
• THX Ultra2 decoding is engaged when the ES DECODING
parameter is set to OFF, or the ES DECODING parameter is set
to AUTO and a 5.1-channel DTS source is detected.
• DTS-ES decoding is engaged when the ES DECODING
parameter is set to ON, or the ES DECODING parameter is set
to AUTO and a 5.1-channel matrix-encoded or 6.1-channel
discrete-encoded DTS-ES source is detected.
• Listening mode name differs depending on the encoding
present in the input source, the ES DECODING parameter set-
ting and the speaker setup.
– The DTS THX ULTRA2 listening mode is available when THX
Ultra2 decoding is engaged.
– The DTS-ES THX listening mode is available when DTS-ES
decoding is engaged.
– The DTS THX ULTRA2 and DTS(-ES) THX listening modes
cannot be activated unless side and rear speakers are
present.
MUSIC
• Designed for playback of 5.1-channel DTS music sources.
• The DTS THX MUSIC listening mode cannot be activated
unless side and rear speakers are present.
• ASA processing is applied to signals sent to the rear speakers.
Refer to the ASA parameter description on page 3-32 for
more information.
• Recommended for home theaters with THX-certified speaker
setups.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29 for detailed
descriptions
.
Note:
The DTS THX MUSIC listening mode can only be activated with
the front-panel or remote control Mode and
buttons.
Option/Parameter Default Setting Possible Settings
LFE MIX +0.0dB -10.0dB to +0.0dB
OUTPUT LEVELS -- --
CUSTOM -- --
MUSIC MODE ADJUST