JBL AV1 - Manual (Page 56)

Setup
JBL Performance
3-18
CONFIGURING ADVANCED SETTINGS (continued)
INPUT SELECT DIGITAL, ANALOG, AUTO
Controls the interaction of the digital and analog audio input con-
nectors assigned for the selected input. The INPUT SETUP menu
can be used to assign one digital and one analog audio input con-
nector for the selected input. See “DIGITAL IN” on page 3-7 and
“ANALOG IN” on page 3-8 for more information.
Pressing and holding the S1 button while pressing and releasing the
7/5 button adjusts the INPUT SELECT parameter, cycling through the
DIGITAL, ANALOG, and AUTO settings.
Note:
When the INPUT SELECT parameter is set to AUTO, the AV1 will not select
the assigned analog audio input connector when a valid digital audio
input source is present. Some DVD and CD players output digital signals
(data) when the player is paused or stopped or when the player is pow-
ered on and the disc drawer is empty. When this occurs, the AV1 auto-
matically selects the assigned digital audio input connector.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
DVD1 ADVANCED
INPUT SELECT
2-CH ANLG BYP
S-VIDEO 16:9
S-VIDEO OSD 4:3
COMPONENT OSD DIGITAL
OFF
AUTO
ON
OFF
DIGITAL
ANALOG
AUTO
DVD1 INPUT SETUP
NAME
DIGITAL IN
ANALOG IN
VIDEO IN
COMPONENT IN
2-CH
ADVANCED
D
DVD1
COAX-1
NONE
AUTO
S-VIDEO-1
1
FILM
5.1 FILM
FILM
ANLG IN LVL
INPUTS SETUP DVD1 ADVANCED INPUT SELECT