JVC XM-EX90 - Manual (Page 14)

14
XM-EX90
MD playback (Basic operation)
The basic operation for playing an MD is described below.
If you use the remote control unit, use the MD CONTROL buttons on the normal control button panel.
1 Load an MD (Mini Disc).
Hold an MD with the side on which an arrow is marked
facing up, and insert it into the slot in the direction of the
arrow. The MD will be pulled in automatically from the
middle.
Number of tracks Total playing time
• If the MD has a disc title, the display shows the disc
title then the number of tracks and total playing time
of the disc.
Shortcut:
When the power is in the STANDBY mode, inserting
an MD turns the power on and the MD is pulled in
automatically.
2 Press ‹/8.
Playback starts.
The
‹ indicator lights up.
• If you are using the remote control unit, press
£.
Shortcut:
When the power is in the STANDBY mode, pressing
‹/8 or £ on the remote control unit turns the power
on and starts MD playback automatically. In this case,
the display will show “NO DISC” if no MD has been
loaded.
• Press &/CANCEL to stop playback in the middle. If you
are operating the remote control unit, press 7.
• Press 0 to eject the MD.
Playback
Main unit Remote control unit
Main unit Remote control unit
/CANCEL
/CANCEL
INPUT
EN14-25.XM-EX90[J]/1 98.6.4, 0:05 PM 14