JVC XM-EX90 - Manual (Page 43)

English
Deutsch
Français
43
XM-EX90
Remote control of the other optional components from the provided
remote control unit
The remote control unit provided with the MD recorder can be used to control the amplifier/tuner CD
player and cassette deck equipped with the Compu Link remote control system. The amplifier/tuner
is controlled directly while the CD player and cassette deck are controlled with the help of the Compu
Link system (page 48).
Point the remote control unit to the remote control sensor of the amplifier/tuner to operate other
components.
Remote controlling the amplifier/tuner
(Page 44)
The amplifier, tuner and timer operations can be
controlled.
To switch the amplifier power between ON and
STANDBY from the remote control unit provided with
the MD recorder, set the POWER control mode to the
amplifier/tuner mode.
Switching the POWER button’s control mode
Amplifier/tuner mode:
Press POWER and “1” on the normal control button
panel simultaneously.
This makes it possible to switch the amplifier/tuner
power between ON and STANDBY.
• In this mode, the MD recorder power cannot be
switched between ON and STANDBY by remote
control.
MD recorder mode:
Press POWER and “10” on the normal control button
panel simultaneously.
This makes it possible to switch the MD recorder power
between ON and STANDBY.
• In this mode, the amplifier/tuner power cannot be
switched between ON and STANDBY by remote
control.
Remote controlling the CD player (Page 46)
Remote controlling the cassette deck (Page 46)
Remote Control of the othe Components
1 2 3 4 5
6 7 8 9 10
+10
FM MODE / MUTING TUNER AUX
POWER
1 2 3 4 5
6 7 8 9 10
+10
FM MODE
/ MUTING TUNER AUX
POWER
BAND
VOLUME
UP
KEY MODE
DOWN
INPUT
PHONES
RX-EX70 INTEGRATED AMPLIFIER / TUNER
STANDBY
DIRECT S. A. BASS
POWER
EN43-60.XM-EX90[J]/1 98.6.4, 0:18 PM 43