JVC XM-EX90 - Manual (Page 47)

English
Deutsch
Français
47
XM-EX90
Operation Examples
Program playback of CDs
1
Press
£ then immediately press 7.
This sets the numeric keys of the remote control unit to
the CD mode.
2 While the CD player is in stop mode, press
PLAY MODE to select “PROGRAM”.
3 Select a disc number.
Press CD 1, CD 2 or CD 3.
4 Select a track number using the numeric keys.
5 Program other tracks by repeating steps 3
and 4.
6 Press
£.
Program playback starts.
Recording of cassette tapes
1
Load the tape for use in recording in the tape
tray of the cassette deck.
2 Press
¶.
The cassette deck enters record-pause mode.
3 Play the source to be recorded.
4 Press
™ or £.
Recording starts.
PLAY MODE
CD 1 CD 2 CD 3
1 2 3 4 5
6 7 8 9 10
+10
EN43-60.XM-EX90[J]/1 98.6.4, 0:18 PM 47