JVC XM-EX90 - Manual (Page 33)

English
Deutsch
Français
33
XM-EX90
5 Press ENTER.
The change made above is entered temporarily in the
memory. The display shows “EDITING”.
1 2 3 4 5
6
6 Press
0 to eject the MD.
The data in the memory is written in the MD before it is
ejected.
The display shows “UTOC writing” during MD write
operation.
• Be careful not to apply impact to the MD recorder
during writing data in the memory in the MD.
Otherwise the recording may be unplayable later.
• The data in the memory is written in the MD also
when the power is switched to the STANDBY mode
while “EDITING” is being displayed.
To exit editing:
Press EDIT before pressing ENTER in step 5.
ENTER
INPUT
EN26-42.XM-EX90[J]/1 98.6.4, 0:09 PM 33