JVC XM-EX90 - Manual (Page 22)

22
XM-EX90
To stop recording
Press
&/CANCEL to stop recording.
To let recording pause temporarily:
Press REC PAUSE.
To resume recording, press
‹/8 or £ of the remote
control unit.
To adjust the analog input level
The input level should be adjusted when the analog
input is recorded.
Start playing the source before proceeding to the level
control.
1 In record-pause mode, press 4 or ¢.
The level control display appears.
LEVEL
1
L REC
R
• The level control display appears for 5 seconds. If no
button has been pressed in this period, the display
returns to the record-pause mode display.
2 Adjust the input level by pressing 4 or ¢.
LEVEL
1 L REC
R
Adjust so that these segments blink at the peak level.
• The level indicator blinks when the input level is too
high. Adjust the input level as described above. Too
high an input level results in distorted recording.
• The input level can be adjusted in the range from –50
to 0.
To display the remaining recording time:
Press DISPLAY in record or record-pause mode.
Each press of DISPLAY switches the elapsed recording
time display and remaining recording time display
alternately.
Main unit Remote control unit
/CANCEL
CD REC REC PAUSE
REC LEVEL
REC LEVEL
DISPLAY
EN14-25.XM-EX90[J]/1 98.6.4, 0:06 PM 22