JVC XM-EX90 - Manual (Page 45)

English
Deutsch
Français
45
XM-EX90
POWER:
Switches the power between ON and
STANDBY.
• Before remote controlling the amplifier/
tuner, set the POWER control mode to the
amplifier/tuner mode (see page 43).
Numeric keys (1 to 10, +10):
Selects preset channels.
FM MODE/MUTING:
Press to switch the FM mode between
AUTO and MONO.
TUNER:
Press to select the tuner as the sound source
and set the numeric keys (1 to 10 , +10) on
the remote control unit to operate the tuner.
Press repeatedly to switch the band (FM or
AM).
AUX:
Press to select the component connected to
the amplifier/tuner’s AUX jacks as the sound
source.
SLEEP:
Sets or releases the sleep timer.
CLOCK/TIMER
Used when setting the timer or clock.
SET:
Sets a timer or clock.
CANCEL:
Cancels a timer operation.
DOWN, UP:
Used when setting the timer or clock.
BASS:
Used when controlling low frequencies. After
pressing BASS, adjust the level by pressing
+/R or –/L.
TREBLE:
Used when controlling high frequencies.
After pressing TREBLE, adjust the level by
pressing +/R or –/L.
BALANCE:
Used when controlling the balance between
the left and right channels. After pressing
BALANCE, adjust the level by pressing +/R or
–/L.
+/R, –/L:
Press when setting the balance, treble and
bass.
S. A. BASS:
Switches the function for enhancing the low
frequencies.
VOLUME +/–:
Adjust the volume.
Pressing + increases the volume and
pressing – decreases it.
FADE MUTING:
Sets the volume to 0. Pressing again returns
to the original volume.
For detailed operation description, refer to the
instruction manual of the amplifier/tuner
(RX-EX70/90).
* In the timer setting and clock setting, use
DOWN and UP of the remote control unit
provided with the MD recorder, in place of +/R
and –/L as described in the amplifier/tuner’s
instruction manual.
EN43-60.XM-EX90[J]/1 98.6.4, 0:18 PM 45