JVC XM-EX90 - Manual (Page 41)

English
Deutsch
Français
41
XM-EX90
Assigning titles while playback or recording
Track titles can be assigned as you play or record the tracks.
1 After start of playback or recording of a track,
press TITLE.
1 2 3 4 5
6
Blinks.
2 Input the track title.
1 Select the character case.
Each press of SMALL LETTER switches the character
case.
Lowercase letters can be input when the button is lit
in green, and uppercase letters can be input when the
button is not lit.
2 Input characters by pressing the character input keys.
Up to 64 characters can be input per title.
3 Press ENTER.
The characters input above are entered temporarily in
the memory. The display shows “EDITING”.
• If it is during playback, the track will be played
repeatedly until ENTER is pressed.
Pressing ENTER stops the playback.
• If it is during recording, recording continues even
after ENTER is pressed.
If ENTER is not pressed until the end of the track, the
characters input before the end of the track are
recorded.
4 Press
0 to eject the MD.
The data in the memory is written in the MD before it is
ejected.
The display shows “UTOC writing” during MD write
operation.
• Be careful not to apply impact to the MD recorder
during writing data in the memory in the MD.
Otherwise the recording may be unplayable later.
• The data in the memory is written in the MD also
when the power is switched to the STANDBY mode
while “EDITING” is being displayed.
TITLE
SMALL
LETTER
SPACE
ENTER
INPUT
EN26-42.XM-EX90[J]/1 98.6.4, 0:10 PM 41