JVC HM-HDS4EK - Manual (Page 20)

Filename [HM-HDS4EK_04Basic.fm]
Masterpage:Left
20
Page 20 April 24, 2003 11:32 am
SAT CONTROL SET (cont.)
F
Select the satellite receiver’s channel for testing.
G
Check the result of the test.
If the satellite receiver’s channel number has not been
changed correctly ...
Press
rt to move the highlight bar (pointer) to “NOT
CHANGED”, then press OK or e . Then perform the
procedure again from step E.
NOTES:
● The Satellite Controller may not work with all types of satellite
receiver.
● For some satellite receivers, you need to set its channel input
mode to 2-digit.
● If your satellite receiver has more than two channel modes, be
sure to set to “All Channel Mode”. For details, refer to the
instruction manual of the satellite receiver.
● When selecting the satellite receiver’s channel ( ੬
step F),
signals from the remote control may interfere with signals
transmitted from the Satellite Controller. In this case, move the
remote control as close to the recorder’s infrared beam
receiving window as possible.
Press the appropriate number
keys to enter one of the
channel positions on the
satellite receiver, then press
OK.
● You can select the channel
position between 1 to 999.
● After pressing OK, the recorder
enters the Test mode.
If the satellite receiver’s
channel number has been
changed to the same one as
you set in step
F ...
Press rt to move the
highlight bar (pointer) to
“CHANGED TO ...”, then
press OK or
e to finish the
Sat Control Set mode.
?
BRAND NAME CODE
JVC
AMSTRAD
CANAL SATELLITE
CANAL +
D-BOX
ECHOSTAR (VIA DIGITAL)
FINLUX
FORCE
GALAXIS
GRUNDIG
HIRSCHMANN
HUMAX
ITT NOKIA
KATHREIN
LUXOR
MASCOM
MASPRO
NOKIA
PACE
PANASONIC
PHILIPS
RADIX
RFT
SABA
SAGEM
SALORA
SAMSUNG
SIEMENS
SKYMASTER
TECHNISAT
THOMSON
TPS
TRIAX
WISI 73
60, 61, 62, 63, 92
81
81
85
82
68
89
88
64, 65, 102
64, 78, 99
88
68
70, 71, 96
68
93
70
87, 94
65, 67, 74, 86, 92
74, 92
66, 84, 101
78
69
97
83, 90
68
83
64
69, 98
66, 100
97
83
91
64
HM-HDS4EK_04Basic.fm Page 20 Thursday, April 24, 2003 11:32 AM