JVC HM-HDS4EK - Manual (Page 86)

Filename [HM-HDS4EK_07Sub.fm]
Masterpage:Left
86
Page 86 April 22, 2003 10:12 pm
SUBSIDIARY SETTINGS (cont.)
Tuner Set
Your recorder needs to memorize all necessary stations in
channel positions in order to record TV programmes. Auto
Channel Set automatically assigns all receivable stations in your
area to call them up by using the VCR PR buttons without going
through any vacant channels.
Auto Channel Set
A
Turn on the recorder.
Press
1
.
B
Access the Main Menu screen.
Press MENU.
C
Access the Tuner Set screen.
A Press
w e
to move the arrow to “INITIAL SET UP”,
then press
t
.
B Press
w e
to move the arrow to “TUNER SET”, then
press OK.
D
Perform Auto Channel Set.
● When you have connected
the video recorder to a TV
offering T-V Link via a fully-
wired 21-pin SCART cable
(
੬
pg. 12), the recorder
automatically performs the
Preset Download and the
T-V LINK screen will appear
(
੬
pg. 16).
● The Auto Set screen appears,
and remains on screen while
the recorder searches for
receivable stations. As Auto
Channel Set progresses, the “
q ” mark on the TV screen moves
from left to right. Wait until the TV screen as shown in step E
appears.
Turn on the TV and select the AV mode.
?
IMPORTANT
Perform the following steps only if —
— Auto Channel Set has not been set correctly by Auto Set
Up or by Preset Download (
੬
pg. 14, 16).
— you have moved to a different area or if a new station
starts broadcasting in your area.
Press
rt
to move the
highlight bar (pointer) to
“AUTO CH SET”, then press
OK or
e t
twice.
TUNER SET
AUTO CH SET
MANUAL CH SET
Beginning End
HM-HDS4EK.book Page 86 Tuesday, April 22, 2003 10:14 PM