JVC HM-HDS4EK - Manual (Page 48)

Filename [HM-HDS4EK_05Timer.fm]
Masterpage:Left
48
Page 48 April 22, 2003 10:12 pm
TIMER RECORDING (cont.)
Express Timer
Programming
You can programme this recorder to timer-record as many as 16
programmes.
If you do not know the P
LUS C ODE number for the programme
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
A
Turn on the recorder.
Press
1
.
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
C
Access the programme screen.
A Press PROG.
B Press
w e
to move the arrow to “PROGRAMME”, then
press OK.
● When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel
some of the currently set programmes. (
੬
pg. 50)
D
Select the programme date.
Press
w r e t
to move the arrow to the desired date,
then press OK.
E
Select the recording deck.
A Press
r t
to move the arrow to “RECORD TO”, then
press OK.
B Press
r t
to select “HDD” or “VHS”, then press OK.
F
Set the start time and stop time of the
programme.
A Press
t
to move the arrow to “START” or “STOP”,
then press OK.
B Press
r t
to select the desired time, then press OK.
G
Select the channel position.
A Press
t
to move the arrow to “TV PROG”, then press
OK.
B Press
r t
to select the desired channel, then press
OK.
● If you want to set a satellite programme, press the number key
“0” to change “TV PROG” to “SAT”, then press VCR PR +/– .
C Press
t
to move the cursor to “CONFIRM”, then press
OK.
H
Set the recording speed.
A Press
r t
to move the arrow to “REC MODE”, then
press OK.
D Press
r t to select the desire mode, then press OK.
Before performing Express Timer Programming:
● Make sure that the recorder’s built-in clock is set properly.
● Turn on the TV and select the AV mode.
● Slide TV/CABLE/SAT switch to the right.
?
HM-HDS4EK.book Page 48 Tuesday, April 22, 2003 10:14 PM