Normal dubbing – JVC HM-HDS4EK User Manual

Page 66

Advertising
background image

Filename [HM-HDS4EK_05Timer.fm]

Masterpage:Left

66

Page 66

April 22, 2003 10:12 pm

EDITING (cont.)

Normal Dubbing

(from VHS to HDD)

You can dub selected scenes from a cassette to the HDD deck,
starting and stopping wherever you wish.

A

Load a cassette.

Insert a cassette with the record safety tab intact.

B

Prepare the VHS deck for dubbing.

A Slide TV/CABLE/SAT to the right, then press S-VHS

and select the programme to be dubbed. You can
select the programme by VCR Navigation. (

੬

pg. 36)

B Press VCR PR+/– to set the channel other than “DUB”.

● Set “PICTURE CONTROL” to “EDIT” (

੬

pg. 81).

C

Locate the start point.

A Search for the point where you want to start dubbing

by pressing 4, 5 or 3 then press 8.

B Press 3 a little, then press 4 to start playback.

C Press 9 to pause playback a little before the start

point.

D

Prepare the HDD deck for dubbing.

A Press HDD.

B Press VCR PR+/– to set the channel “DUB”.

C Press MODE to select recording speed.

E

Start dubbing.

A Press S-VHS and

4

to start playback.

B Press HDD and

7

(

7

and

4

on the remote control) to

start dubbing.

● To enter Record-Pause mode, press and hold

7

and press

9

on the remote control. To resume recording, press and hold

7

and press

4

on the remote control.

F

End dubbing.

Press

8

twice. Then press S-VHS and press

8

.

NOTES:

● There may be a discrepancy of several seconds between where

you intend editing to start, and where it actually starts.

● The superimposed indication during the operation or dubbing

is not recorded.

● For HDD deck, the recording pause takes effect only when the

recorder is recording on the HDD deck with the channel set to
“L-1”, “F-1”, or “DUB”. The recording pause is released in 5
minutes automatically. Picture and sound may be distorted at
the point where the recording pause is released.

● Dubbing copyright guarded tape is not possible.

● When you select “EDIT” to dub tapes in step B, be sure to

select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.

?

HM-HDS4EK.book Page 66 Tuesday, April 22, 2003 10:14 PM

Advertising