SpectronIQ PD-1100 - Manual (Page 54)

Playing Audio CDs
42
Searching to a Specified Time
You can skip to a specified time using the
TIME button.
To search to a time:
1. Press TIME to bring up the time search
display.
2. Enter the desired time using the
keypad.
3. Press ENTER to navigate to the selected
time.
To exit the search display without going
to a location, press TIME a second time.
Repeating Tracks
Press REPEAT to cycle through the repeat
options: the current track, the current
disc, and off.
Repeating an Arbitrary Section
You can repeat an arbitrary section of
audio using the A-B button.
To repeat an arbitrary selection:
1. Press A-B to mark the beginning of the
section to be repeated.
2. Press A-B again to mark the end of the
section.
The section will begin repeating and will
continue until you press the A-B button
again.
Programming Playback Order
Using the PROG button, you can program
a sequence of up to 20 tracks.
To program a playback sequence:
1. Press PROG to bring up the program
display.
2. Select a slot using the arrow controls.
3. Press to move to the Track column.
4. Select the track to be scheduled in the
selected slot and press ENTER.
: SELECT : PLAY
PROGRAM TRACK
1.
2.
3.
4.
5. 01
02
03
04
05
OMPD800.book Page 42 Thursday, September 21, 2006 1:39 PM