Sony GDM-90W01T - Manual (Page 14)

14
CANCEL MOIRE:
Cancels the moire when ”ON” is selected.
The adjustment data becomes the individual setting for
each input signal received.
MOIRE ADJ:
Reduces fuzziress of the picture caused by canceling
moire.
Adjust beginning from 0 until the moire is minimum.
The adjustment data becomes the individual setting for
each input signal received.
LANDING:
See “Landing” on page 10.
The adjustment data becomes the common setting for all
input signals received.
DEGAUSS:
See “Degaussing the screen” on page 15.
The OSD automatically disappears after about 30 seconds.
To turn off the OSD, press the
button again.
To reset, press the ? (reset) button while the OSD is on.
The selected parameter is reset.
Adjusting the color
The adjustment data becomes the common setting for all
input signals received.
1
Press the button.
The “COLOR” OSD appears.
2 Press the >?// button to select the color
temperature to adjust, 5000, 6500 or 9300.
3
Press the ¨./> button to select and the >?//
button to adjust the parameter.
VARIABLE:
Adjusts the color selected in step 2 to the desired color
temperature. The figure of the selected color
temperature changes.
R BIAS/G BIAS/B BIAS:
Adjusts the black level of each signal. “++” appears at
the right shoulder of the adjusted color temperature.
R GAIN/G GAIN/B GAIN:
Adjusts the white level of each signal. “++” appears at
the right shoulder of the adjusted color temperature.
The OSD automatically disappears after about 30 seconds.
To turn off the OSD, press the
button again.
To reset all parameters of a particular color
temperature
Select the color temperature in step 2, and then press the ?
(reset) button. All parameters of the color temperature are
reset and “++” at the right shoulder disappears.
To reset a particular parameter of a particular color
temperature
Select the parameter in step 3, and then press the ? (reset)
button. Only the selected parameter of the color
temperature is reset.
Resetting to the factory-
preset levels
Reset in the same way as described in “Resetting to the
factory-preset levels” on page 11.
5 0 0 0K 6 5 0 0K 9 3 0 0K
COLOR
COLOR TEMPERATURE
VAR I ABLE
SELECT SET / AD JUST
R B I AS
G B I AS
B B I AS
R GA I N
G GA I N
1 0 0
50
50
50
50
B GA I N
50
EXPERT
50
Adjustments (Expert mode)