Sony GDM-90W01T - Manual (Page 3)

3
EN
F
D
ES
I
J
Table of Contents
Precautions ............................................................................ 3
Getting Started ...................................................................... 4
Selecting the Input Signal.................................................... 4
Functions of Controls ........................................................... 5
Selecting the OSD Language .............................................. 7
Changing the OSD Position ................................................ 7
Operating the OSD ............................................................... 7
Adjustments (Normal mode).............................................. 8
Adjustments (Expert mode) .............................................. 12 Control Lock Function ....................................................... 15
Degaussing the Screen ....................................................... 15
Plug & Play .......................................................................... 16
Damper Wire ....................................................................... 16
Power Saving Function...................................................... 16
Input Signal Warning Function ........................................ 17
Use of the Tilt-Swivel ......................................................... 17
Specifications ...................................................................... 17
Troubleshooting ................................................................. 18
Installation
• Prevent internal heat build-up by allowing adequate air
circulation. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.
• Do not install the unit near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
• Do not place the unit near equipment which generates
magnetism, such as a converter or high voltage power
lines.
Maintenance
• Clean the cabinet, panel and controls with a soft cloth
lightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent,
such as alcohol or benzine.
• Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items, like a ballpoint pen or a
screwdriver. This type of contact may result in a scratched
picture tube.
Transportation
When you transport this monitor for repairing or shipping,
use the original carton box and packing materials.
Warning on power
connection
• Use a proper power cord for your local power supply.
Examples of plug shapes
• Before disconnecting the power cord, wait for at least 30
seconds after turning off the power to allow the static
electricity on the CRT display surface to discharge.
• After the power has been turned on, the CRT is
demagnetized for approximately five seconds. This
generates a strong magnetic field around the bezel, which
may affect the data stored on magnetic tapes or disks near
the bezel. Place such magnetic recording equipment and
tapes/disks away from this unit.
The socket-outlet should be installed near the
equipment and be easily accessible.
Precautions
for 100 to 120 V AC for 200 to 240 V AC