Sony GDM-90W01T - Manual (Page 9)

9
EN
F
D
ES
I
J
2 3 10
CENTER
2 3 10
S I ZE
GEOMETRY
2 3 10
Adjusting the picture
centering
The adjustment data becomes the individual setting for each
input signal received.
1 Press the button.
The “CENTER” OSD appears.
2
For vertical adjustment
Press the ¨ ./> buttons.
. . . . to move down
> . . . to move up
For horizontal adjustment
Press the > ?// buttons.
? . . . to move left
/ . . . to move right
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the
button again.
To reset, press the ? (reset) button while the OSD is on.
The horizontal and vertical centerings are both reset.
Adjusting the picture size
The adjustment data becomes the individual setting for each
input signal received.
1
Press the Å button.
The “SIZE” OSD appears.
2
For vertical adjustment
Press the ¨ ./> buttons.
. . . . to decrease
> . . . to increase
For horizontal adjustment
Press the > ?// buttons.
? . . . to decrease
/ . . . to increase
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the
Å button again.
To reset, press the ? (reset) button while the OSD is on.
The horizontal and vertical sizes are both reset.
Adjusting the picture rotation
The adjustment data becomes the common setting for all
input signals received.
1 Press the Dd button.
The “GEOMETRY” OSD appears.
2 Press the ¨./> buttons.
. . . . to rotate counterclockwise
> . . . to rotate clockwise
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the Dd button again.
To reset, press the ? (reset) button while the OSD is on.
The picture rotation and the pincushion settings are both
reset.