Sanyo XG-705A - Manual (Page 18)

18
2. Setup Procedures
■ When projecting with the Moderator function.
For details about Moderator function, refer to the “8. Use the Moderator Function.”
a Install “NetworkModule Client” into each client’s (participants except for the moderator)
computers. For installation, refer to “
■ When projecting via a selected computer which is
connected to the LAN” (p.17).
s Click (Select) “NetworkModule Moderator” on the left side of the screen.
d Click “Install NetworkModule Moderator”.
✳ By clicking the “Launch NetworkModule Moderator”, you can activate the software directly
from the CD-ROM without installing the software into the computer.
f Install each software with following the instructions on the installation screen.
g After the installation, the start-up menu will be displayed or the program icon
will be added on the screen.
h Activate the program to confirm the installation. When the program is activated, the
operation screen will appear.
Refer to “3. Names and Functions of the Operation Screen” (pp.19–23) to operate each
program screen.
To uninstall (delete) each program, activate the uninstall program in the application start
menu.