Sanyo XG-705A - Manual (Page 97)

97
11. Appendix
Configuring WEP security with the projector
Configure WEP security with the projector by following the steps below.
After configuring the network in “5. Wireless LAN Configurations” (pp.34–36), select “Next” in
the LAN setting screen (see page 35). The WEP configuration screen appears. Refer to “6.
Configurations with Browser”
➔ “Wireless Setting” (p.47) as well.
1. Use the Point ed buttons to select the WEP security type. To disable WEP security, select
“Disable.”
Although you can enable LEAP, you must enter the Key index code for LEAP with the
browser.
Use the Point 7 8 buttons move among the items; use the Point ed buttons to adjust
settings.
WEP configuration screen